AfterMath: Copying Traces

Note: This article is part of the AfterMath Data Organizer User's Guide

There are a variety of ways to put a trace on a plot, and you should take the time to learn about all of them. Here is a list of some of the ways to do this:

• Create a New Plot from a Data Table (click here for details)
• Copy a Trace from an Existing Plot (discussed in this article)
• Drag a Trace from an Existing Plot (click here for details)
• Use the "Add Trace" Menu Option (click here for details)

AfterMath makes it very easy for you to copy traces from one plot to another plot. This portion of the User's Guide describes how to do this using traditional copy and paste operations. Traces may also be moved or copied between plots using drag-and-drop mouse actions (click here).

As an example for illustrating how to copy a trace from one plot to another, consider the archive shown below. This archive contains two plots. One plot is called “Activation Barrier” and the other plot is called “Potential Well”. Note that the figure below shows two views of the same archive so that you can see how each plot appears initially.

Note that by fully expanding the archive tree (on the left side of the screen) to reveal all levels of the archive hierarchy, it is possible to see the individual traces in the tree. The traces on both plots are named “trace” in this example.

To copy the trace from one plot to another plot, the following copy-and-paste sequence is performed directly on the traces and plots in the archive tree.

Step One: Right-Click on Trace and Choose Copy
Step Two: Right-Click on Destination Plot and Choose Paste
Final Result: Trace Now Appears on Destination Plot

Note that the trace was automatically renamed “Copy of trace” to prevent both traces on the second plot from having the same name.

If you wish to move (rather than copy) traces from one plot to another, then use the “Cut” option rather than the “Copy” option when performing the sequence of operations described above. If you use “Cut”, then the trace is removed from the original plot when you “Paste” it on to the destination plot.

Copyright © 2008 Pine Research Instrumentation (Raleigh, NC). All Rights Reserved.