WaveNow/WaveNano - Firmware Upgrade
Related Software Links: AfterMath Support Page, AfterMath User Guide, AfterMath Electrochemistry Guide, AfterMath Installation Guide
Related Hardware Links: WaveNow USB Potentiostat, WaveNano USB Potentiostat
| STEP ONE: Contact Pine to download the new firmware. The firmware upgrade will be inside a ZIP file as shown below. |
|---|
 |
| STEP TWO: Open the ZIP file and copy the firmware package to the Windows desktop (see below). |
 |
| STEP THREE: Double-click on the firmware package to launch the firmware update program (see below). Make sure that the AfterMath application is NOT running and press the OK button. |
 |
| STEP FOUR: Information about the firmware version is displayed for your review. Press the OK button to install the new firmware in the potentiostat (see below). |
 |
| STEP FIVE: Wait for the firmware to be installed. This may take several seconds (see below). |
 |
| STEP SIX: After the firmware is installed, the potentiostat will reset and the process is complete. Note that the message “*** Receive timed out” (as shown below) is the normal response after the reset. A dialog box confirming success will also appear (see below). |
 |
| FINAL STEP: At this point, you can restart AfterMath and confirm that the correct firmware version has been installed (see below). |
 |
